Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VTP Not Propagating

Please erview attachment. We have a problem with VTP not propagating.  We have a 3550 which is acting as the VTP server in the domain fwnet4.
I've verified that the domain name is the same, VTP version is the same, mode is configured correctly, all connections from switch-switch are trunked using dot1q, but the vlans are not propagating. Why? Thanks in advance.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: VTP Not Propagating

The MD5 digest on your 4506 is not the same, do you have VTP password configured? If no, you can try to change the VTP domain name to a dummy one and change it back to see if VTP propagate or not. Also, you can also try to add and remove a dummy VLAN also.

HTH,

jerry

Hall of Fame Super Blue

Re: VTP Not Propagating

David

Your configuration revision number is 0 on all switches. Please either add or modify an existing vlan on the 3550. This should then update the configuration revision number to 1 and force the VTP clients to update their vlan databases.

Jon

6 REPLIES
Cisco Employee

Re: VTP Not Propagating

The MD5 digest on your 4506 is not the same, do you have VTP password configured? If no, you can try to change the VTP domain name to a dummy one and change it back to see if VTP propagate or not. Also, you can also try to add and remove a dummy VLAN also.

HTH,

jerry

New Member

Re: VTP Not Propagating

There are no vtp passwords and I've change vtp domain name, then back again with no luck.

Re: VTP Not Propagating

Can you check your trunk configuration between the switches. Are all the vlans passed through or are there some disallowed vlans? check if Vlan1 is passed through.

BR//Rajiv

New Member

Re: VTP Not Propagating

Show interface trunk shows vlan 1-4094 allowed. My last option is to reboot the switch, which I don't want to do since it's in production.

Hall of Fame Super Blue

Re: VTP Not Propagating

David

Your configuration revision number is 0 on all switches. Please either add or modify an existing vlan on the 3550. This should then update the configuration revision number to 1 and force the VTP clients to update their vlan databases.

Jon

New Member

Re: VTP Not Propagating

Thanks Jon, that worked.

2936
Views
0
Helpful
6
Replies