Good afternoon,
Having an issue with VTP propagation. I have two 2950 switches, Switch_1 as VTP server and Switch_2 as VTP Client and both fa0/23 ports are configured as trunks. Switch_1 has four Vlans (vlan 1, vlan 10, vlan 20, vlan 30) but they are not crossing over to Switch_2. Here are some shows:
SWITCH_1:
Switch_1#show ip int br
Interface IP-Address OK? Method Status Protocol
Vlan1 192.168.10.1 YES NVRAM up up
FastEthernet0/1 unassigned YES unset up up
FastEthernet0/2 unassigned YES unset up up
FastEthernet0/3 unassigned YES unset down down
FastEthernet0/4 unassigned YES unset down down
FastEthernet0/5 unassigned YES unset down down
FastEthernet0/6 unassigned YES unset down down
FastEthernet0/7 unassigned YES unset down down
FastEthernet0/8 unassigned YES unset down down
FastEthernet0/9 unassigned YES unset down down
FastEthernet0/10 unassigned YES unset down down
FastEthernet0/11 unassigned YES unset down down
FastEthernet0/12 unassigned YES unset down down
FastEthernet0/13 unassigned YES unset down down
FastEthernet0/14 unassigned YES unset down down
FastEthernet0/15 unassigned YES unset down down
FastEthernet0/16 unassigned YES unset down down
FastEthernet0/17 unassigned YES unset down down
FastEthernet0/18 unassigned YES unset down down
FastEthernet0/19 unassigned YES unset down down
FastEthernet0/20 unassigned YES unset down down
FastEthernet0/21 unassigned YES unset down down
FastEthernet0/22 unassigned YES unset down down
FastEthernet0/23 unassigned YES unset down down (there is a cable connected here)
FastEthernet0/24 unassigned YES unset down down
Switch_1#show vtp status
VTP Version : 2
Configuration Revision : 3
Maximum VLANs supported locally : 128
Number of existing VLANs : 8
VTP Operating Mode : Server
VTP Domain Name : paquin.com
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x23 0xDE 0xEC 0xAD 0x40 0xBD 0x2E 0xD3
Configuration last modified by 192.168.10.1 at 3-1-93 07:25:05
Local updater ID is 192.168.10.1 on interface Vl1 (lowest numbered VLAN interface found)
Switch_1#show vlan br
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/16, Fa0/17, Fa0/18, Fa0/19
Fa0/20, Fa0/21, Fa0/22, Fa0/23
Fa0/24
10 DECK active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5
20 OPS active Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/10
30 ENG active Fa0/11, Fa0/12, Fa0/13, Fa0/14
Fa0/15
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
Switch_1#show running-config int fa0/23
Building configuration...
Current configuration : 57 bytes
!
interface FastEthernet0/23
switchport mode trunk
end
SWITCH_2:
Switch_2#show ip int br
Interface IP-Address OK? Method Status Protocol
Vlan1 192.168.20.1 YES manual up down
FastEthernet0/1 unassigned YES unset down down
FastEthernet0/2 unassigned YES unset down down
FastEthernet0/3 unassigned YES unset down down
FastEthernet0/4 unassigned YES unset down down
FastEthernet0/5 unassigned YES unset down down
FastEthernet0/6 unassigned YES unset down down
FastEthernet0/7 unassigned YES unset down down
FastEthernet0/8 unassigned YES unset down down
FastEthernet0/9 unassigned YES unset down down
FastEthernet0/10 unassigned YES unset down down
FastEthernet0/11 unassigned YES unset down down
FastEthernet0/12 unassigned YES unset down down
FastEthernet0/13 unassigned YES unset down down
FastEthernet0/14 unassigned YES unset down down
FastEthernet0/15 unassigned YES unset down down
FastEthernet0/16 unassigned YES unset down down
FastEthernet0/17 unassigned YES unset down down
FastEthernet0/18 unassigned YES unset down down
FastEthernet0/19 unassigned YES unset down down
FastEthernet0/20 unassigned YES unset down down
FastEthernet0/21 unassigned YES unset down down
FastEthernet0/22 unassigned YES unset down down
FastEthernet0/23 unassigned YES unset down down (there is a cable connected here)
FastEthernet0/24 unassigned YES unset down down
Switch_2#show vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 128
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : paquin.com
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xC8 0x23 0x8E 0xBF 0xFA 0x22 0x66 0x2D
Configuration last modified by 192.168.20.1 at 3-1-93 00:43:19
Switch_2#show vlan br
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
Switch_2#show running-config int fa0/23
Building configuration...
Current configuration : 57 bytes
!
interface FastEthernet0/23
switchport mode trunk
end
Oddly enough, the port lights on the switch are not illuminated yet vlan 1 on both switches is set to no shutdown.
Anything more I should offer as info?
Thanks
