08-13-2007 07:36 AM - edited 03-05-2019 05:52 PM
I have a 6509 that is setup as a VTP server and my 3750 is a client. The 3750 is curently only using VLAN90 for the management interface and that interface is up/up. When I type "show interface trunk" on the 6509 side I only see VLAN1 as "Vlans in spanning tree forwarding state and not pruned". It would seem to me that I would see VLAN90 in the same catagory under "show interface trunk".
VTP SERVER SIDE
CoreSwitchB#sh inter trunk
Port Mode Encapsulation Status Native vlan
Gi1/11 on 802.1q trunking 1
Port Vlans allowed on trunk
Gi1/11 1-4094
Port Vlans allowed and active in management domain
Gi1/11 1-3,5-6,9-10,17,20,23-26,33-34,40,43-44,46-49,51-53,55,90-92,112,121,125,500
Port Vlans in spanning tree forwarding state and not pruned
Gi1/11 1
-------------
CoreSwitchB#sh vtp s
VTP Version : 2
Configuration Revision : 99
Maximum VLANs supported locally : 1005
Number of existing VLANs : 37
VTP Operating Mode : Server
VTP Domain Name : GRTER
VTP Pruning Mode : Enabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xA8 0x18 0x03 0xE9 0x3E 0x10 0x89 0x9B
Configuration last modified by 127.0.0.51 at 8-13-07 15:20:33
Local updater ID is 127.0.0.51 on interface EO0/0 (first interface found)
++++++++++++++++++++++++++++++++++
VTP CLIENT SIDE
Bdlg6.1A#sh inter trunk
Port Mode Encapsulation Status Native vlan
Gi1/0/1 on 802.1q trunking 1
Port Vlans allowed on trunk
Gi1/0/1 1-4094
Port Vlans allowed and active in management domain
Gi1/0/1 1-3,5-6,9-10,17,20,23-26,33-34,40,43-44,46-49,51-53,55,90-92,112,121,125,500
Port Vlans in spanning tree forwarding state and not pruned
Gi1/0/1 1-3,5-6,9-10,17,20,23-26,33-34,40,43-44,46-49,51-53,55,90-91,112,121,125,500
-------------
Bdlg6.1A#sh vtp s
VTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 99
Maximum VLANs supported locally : 1005
Number of existing VLANs : 37
VTP Operating Mode : Client
VTP Domain Name : GRTER
VTP Pruning Mode : Enabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xA8 0x18 0x03 0xE9 0x3E 0x10 0x89 0x9B
Configuration last modified by 127.0.0.51 at 8-13-07 15:20:33
Bdlg6.1A#
08-13-2007 03:08 PM
Configure a port in the 3750 as access-port for Vlan90, plug a workstation - does the behavior change?
08-13-2007 04:36 PM
Don't know could have something to do with the core running vtp version 2 and the 3750 is running vtp version one . Is the native vlaN matched on both sides of the trunk ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: