Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VTP qestion

Hi All,

we have a client who has switches all over the place. One of the switch is in VTP client mode, and I am trying to find out who its VTP server is. there are multiple VTP servers in the network though.

Thanks

Alex

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: VTP qestion

Issue the following command:

show vtp status

you should see something like this:

Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

The IP address you see will be one of the VTP servers. I don't know of any way to show all the VTP domain servers at once.

1 REPLY
New Member

Re: VTP qestion

Issue the following command:

show vtp status

you should see something like this:

Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

The IP address you see will be one of the VTP servers. I don't know of any way to show all the VTP domain servers at once.

98
Views
0
Helpful
1
Replies
CreatePlease to create content