Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VTP Revision No.

Hi, I would like to know, how do i recover the old vlan configuration if vlan configuration change and update with new switch added in the network with low vtp revision no.

12 REPLIES
New Member

Re: VTP Revision No.

anyone can suggest me on this type of issues.

Re: VTP Revision No.

So you want to know if you accidentally adds a switch with a higher VTP revision number to an existent network . The new switch overwrites the VLANs on the old switches in the network.

I'm affraid it's already too late. I don't know if there is a method. I'm affraid not but I want to give you tips at least how to prevent:

OR

change the VTP domain name on the new switch and then back

OR

change mode to transparent and then back.

But I suppose you knew this.

But if you have the problem as descibed earlier, I can't help you

New Member

Re: VTP Revision No.

it did not happen, i would like to know the process to recover the old vlan configuration, if this type of problem happen.

Hall of Fame Super Silver

Re: VTP Revision No.

hello Goutam,

the only suggestion is to save a

show vlan

routinely

from that output you can rebuild the vlan database by reentering commands

if your legitimate VTP servers are new enough to not use the vlan database context also the saved configurations of them can help in rebuilding the original database.

There is no rollback option to a previous revision number as far as I know.

Hope to help

Giuseppe

New Member

Re: VTP Revision No.

Thansk a lot, I wanted to know that there is any option to recover the old configuration or not.

thanks...

New Member

Re: VTP Revision No.

Hi Goutam,

Yes there is , you will need to do "Config rollback" or "Config replace"

HTH

DAK

New Member

Re: VTP Revision No.

could you please give me the process to do it...i will be thankfull to you...

New Member

Re: VTP Revision No.

Yes ,

You can have this ; http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtrollbk.html.

OR

Do this Switch# configure replace

disk0:myconfig-1 list time 30

HTH

DAK

New Member

Re: VTP Revision No.

Good stuff.

But will the switches save the archive configuration only when there is any changes? Or the switches do not care and just save the archive files as soon as the timer triggers them?

Thanks,

Cedar

New Member
New Member

Re: VTP Revision No.

How is it now ?

working fine ?

HTH

DAK

New Member

Re: VTP Revision No.

thanks

188
Views
5
Helpful
12
Replies
CreatePlease to create content