Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Want to add two 6504E in the working NW of two 6506 is advisable

Dear Folks,

We are going to migrate Telecom NW.

We have existing Campus NW with 2 CORE in redundant and load sharing ( 2 MSFCs in each ).

And for Telecom NW we purchased 2 More core SW ( 1 MSFC in each ).

So should we go for different NW for Telecom and routing through WAN Router or we should implement CAN of 4 COre switches with load sharing and for telecom NW new Vlan on Core .....?

We have no of vlan existing 60 .

Pls suggest me soon >>>>>

Dipesh

1 REPLY
Silver

Re: Want to add two 6504E in the working NW of two 6506 is advis

Yes you can add these two switches in your existing network with load sharing.

Here is the command guide for the Catalyst 6500 Series MSFC Cisco which will help you :

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/hybrid/command/reference/chap1.html

96
Views
0
Helpful
1
Replies
CreatePlease to create content