Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

want to dd a New switch in stack

Hi friends,

i want to remove an access layer 3750 48 POE master switch and replace with a  new 3750 switch in the stack. i want to copy the same configuration to new switch since the old switch is having POE issue and I got replacement of the malfunctioned switch. we have VTP domain is configured in the network...

so please guide me step by step to replace new switch Thanks

Regards,

Faisal

Everyone's tags (4)
3 REPLIES
New Member

want to dd a New switch in stack

Take the new Switch and copy the same IOS on it as it is on your stack configuration. Then clear all your config (wr erase and delete vlan.dat)

After this simply disconnect the old master switch and install the new one. It ain't that important which swich is elected the master. the config will remain anyway.

New Member

want to dd a New switch in stack

why do i need to erase vlan.dat switch is brand new shiped from cisco also why do i need copy IOS??? both old and new switch have same IOS and model number

New Member

want to dd a New switch in stack

also there are only two switches is the stack and master has only Trunk link to Distribution layer switch there is no redundancy from access to distribution layer swithes

307
Views
0
Helpful
3
Replies
CreatePlease login to create content