Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Want to NAT destination IP on external interface

Hi,

I want to translate destination IP address on the outside interface of the router (i.e the connection is initiated from outside and the destination is the internal IP address), i want to perform one to one translation i.e static NAT.

Can someone tell me how can i perform that.

Thanks

Yamin

2 REPLIES

Re: Want to NAT destination IP on external interface

Yamin,

The below link will be a good place for you to start:-

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml

HTH.

Blue

Re: Want to NAT destination IP on external interface

Not sure I am giving you something that could help you, but keep in mind that you cannot do a PAT overload to an inside NAT interface.

Victor

123
Views
0
Helpful
2
Replies