05-14-2009 08:25 AM - edited 03-06-2019 05:44 AM
Even though we know most of the modules are warm insertable (hot swapable), are there any experience, comment or recommendation about inserting a WS-SUP32-GE-3B (the second supervisor) on Warm?.
Thanks in advance,
Juan Salgado
Solved! Go to Solution.
05-14-2009 08:38 AM
Hello Juan,
you can install the sup on the live chassis, take care of electostatic charges connecting your body to the chassis
see
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_16999.html
Your own ESD-prevention equipment or the disposable grounding wrist strap included with all upgrade kits, field-replaceable units (FRUs), and spares
Hope to help
Giuseppe
Hope to help
Giuseppe
05-14-2009 03:43 PM
Hi Juan,
Just make sure the IOS of the new Sup blade is the same with the current one. Also make sure that there is NO configs available.
05-14-2009 08:38 AM
Hello Juan,
you can install the sup on the live chassis, take care of electostatic charges connecting your body to the chassis
see
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_16999.html
Your own ESD-prevention equipment or the disposable grounding wrist strap included with all upgrade kits, field-replaceable units (FRUs), and spares
Hope to help
Giuseppe
Hope to help
Giuseppe
05-14-2009 10:43 AM
For sure it helps.
Thanks a lot. I just needed that little trust from your experience.
Juan Salgado
05-14-2009 03:43 PM
Hi Juan,
Just make sure the IOS of the new Sup blade is the same with the current one. Also make sure that there is NO configs available.
05-15-2009 05:32 AM
Great recomendations.
Thanks a lot.
Juan Salgado
05-14-2009 09:39 PM
No problem Jaun done it a ton of times. Just watch the ESD.
05-15-2009 06:19 PM
Thanks for the ratings, Juan.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide