I need to configure web authentiocation on 2960 switch with Software (C2960-LANBASEK9-M), Version 12.2(52). Here is the configuration used on the switch:
aaa new-model
aaa group server radius accounting-group
server X.X.X.X auth-port 1812 acct-port 1813
!
aaa group server radius authentication-group
server X.X.X.X auth-port 1812 acct-port 1813
!
aaa authentication login default group authentication-group local
aaa authentication dot1x default group authentication-group
aaa authorization network default group authentication-group local
aaa authorization auth-proxy default group authentication-group
aaa accounting send stop-record authentication failure
aaa accounting exec default start-stop group accounting-group
aaa accounting network default start-stop group accounting-group
aaa accounting resource default stop-failure group accounting-group
ip device tracking
ip admission name rule2 proxy http inactivity-time 60
interface FastEthernet0/3
switchport access vlan XXX
switchport mode access
ip access-group policy2 in
authentication order webauth
ip admission rule2
ip access-list extended policy2
permit udp any any eq domain
permit udp any any eq bootps
This is not working. Any help will be appreciated. Many thanks
