Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

What files are needed to boot 6513

What files do I need on a catalyst 6513 to get it to boot?

Here is what is installed..

NAME: "7", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 4.4"

PID: WS-SUP720-3B , VID: , SN: SAL0917A12C

NAME: "msfc sub-module of 7", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 2.3"

PID: WS-SUP720 , VID: , SN: SAL09274RF9

NAME: "switching engine sub-module of 7", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.1"

PID: WS-F6K-PFC3B , VID: , SN: SAL09169F7M

NAME: "8", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 4.4"

PID: WS-SUP720-3B , VID: , SN: SAL09285BWX

NAME: "msfc sub-module of 8", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 2.3"

PID: WS-SUP720 , VID: , SN: SAL092859A5

NAME: "switching engine sub-module of 8", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.1"

PID: WS-F6K-PFC3B , VID: , SN: SAL092753BA

NAME: "9", DESCR: "WS-X6748-GE-TX CEF720 48 port 10/100/1000mb Ethernet Rev. 2.3"

PID: WS-X6748-GE-TX , VID: V01, SN: SAD102105KG

NAME: "switching engine sub-module of 9", DESCR: "WS-F6700-CFC Centralized Forwarding Card Rev. 2.0"

PID: WS-F6700-CFC , VID: , SN: SAD1025028B

NAME: "10", DESCR: "WS-X6748-GE-TX CEF720 48 port 10/100/1000mb Ethernet Rev. 2.3"

PID: WS-X6748-GE-TX , VID: V01, SN: SAD102407LN

NAME: "switching engine sub-module of 10", DESCR: "WS-F6700-CFC Centralized Forwarding Card Rev. 2.0"

PID: WS-F6700-CFC , VID: , SN: SAD102502J3

9 REPLIES

Re: What files are needed to boot 6513

Mike,

Do you plan to use hybrid or native IOS? You can use the software adviser to find out which IOS supports your needs.

http://tools.cisco.com/Support/Fusion/FusionHome.do

Mark

Re: What files are needed to boot 6513

Native IOS. Right now I have the following files on compact flash....

s72033-adventerprisek9_wan-mz.122-18.SXF14.bin

and

c6msfc-boot-mz.121-27b.E1.bin

Mike

Re: What files are needed to boot 6513

The s72033-adventerprisek9_wan-mz.122-18.SXF14.bin image will be the only image you need.

Mark

Re: What files are needed to boot 6513

I don't need a file to boot the sups? like c6msfc-boot-mz.121-27b.E1.bin

Mike

Re: What files are needed to boot 6513

Mike,

The IOS is all you need.

Re: What files are needed to boot 6513

Thanks....and of course that is not working. Any ideas how I can format CompactFlash while in rommon mode?

Mike

Re: What files are needed to boot 6513

Mike,

I don't believe there is a way to format in rommon. Is there an image in bootflash to get it out of rommon. If not it looks like xmodem will be your only option.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml#s720recover

Mark

Re: What files are needed to boot 6513

No file in bootflash and I am already looking at doing the xmodem upload to bootflash:

Thanks

Mike

Re: What files are needed to boot 6513

Mike,

Sorry the format of your compact cards didn't work out for you.

Best of luck,

Mark

188
Views
6
Helpful
9
Replies