Not really sure what you are asking here. If you have "switchport trunk pruning vlan none" then you are saying do not prune any vlans from the trunk link. So the vlans could be created on that switch or they could be created on another switch as Andrew says.
On this switch all it says is that any traffic for any vlan that is allowed on the trunk will be forwarded on that interface regardless of whether any ports further down the line are in that vlan.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...