03-08-2009 02:47 PM - edited 03-06-2019 04:27 AM
Folks, I took an older 2621 and upgraded the ram & flash. I inserted a AIM vpn card. I now want to upgrade the IOS so the AIM card shows up in my config. Ill be doing site to site ipsec VPNS...Which one do you guys recommend?
Solved! Go to Solution.
03-09-2009 02:21 AM
Hi
This should give you what you need (and a little more) :-
12.3(26)
Feature set/License IP/FW/IDS PLUS IPSEC 3DES BASIC
c2600-ik9o3s3-mz.123-26
Minimum DRAM = 64
Minimum Flash = 16
btw, you can find out what ios you need using the software advisor (CCO login needed)
hxxp://tools.cisco.com/Support/Fusion/FusionHome.do
03-08-2009 02:58 PM
Hi
What have you upgraded the RAM and Flash to and is the the XM series ?
Also which AIM-VPN is it EP/BP
03-08-2009 11:03 PM
64m main memory
32m flash
no it is not XM series
THE AIM card is the BP
03-09-2009 02:21 AM
Hi
This should give you what you need (and a little more) :-
12.3(26)
Feature set/License IP/FW/IDS PLUS IPSEC 3DES BASIC
c2600-ik9o3s3-mz.123-26
Minimum DRAM = 64
Minimum Flash = 16
btw, you can find out what ios you need using the software advisor (CCO login needed)
hxxp://tools.cisco.com/Support/Fusion/FusionHome.do
03-09-2009 11:48 AM
Thank you. That worked fine :)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: