Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

what is a backplane

Hi. I did some reading on backplanes and from what i gathered it is a bus to connect the router/switch. What i don't understand is what is real purpose/function of a backplane. Forgive me if my question seems very simple.

Thanks in advance for your indulgence.

6 REPLIES
New Member

Re: what is a backplane

You described it yourself. It's a bus. To expand a little it's a medium over which all the components of a device can communicate.

New Member

Re: what is a backplane

Sorry, i'm still a bit confused. I know that a bus is used for communication between components. What i don't know is what are its practical usage. I mean, let's say i have a 2960 switch with a certain bus, i have connected the switch to my workstations and everything is working just fine. How or where does the backplane get into the picture?

Thanks.

Silver

Re: what is a backplane

Hi Marcus

My simple analogy is that I think of the backplane as the mother board/main circuit board of the switch. It allow the CPU, DRAM, FLASH, ASICS communicate within the switch, which facillitate the switch functioning as required/expected.

If all you had inside your switch was a green board with these components and all the rest just plugged into slots on the board with no way to communicate, then all you would have is a pretty hefty paper weight :)

It's probably not the best analogy but it is the way I think of the backplane.

Best Regards,

Michael

New Member

Re: what is a backplane

Hi. Sorry. I think i finally got it. The backplane is the motherboard in a router/switch right?

Re: what is a backplane

Hi,

As explained, backplane is a circuit biard that connects several connectors in parallel to each other.

Switch backplane generally refers to the switch fabric. When we talk about the switch backplane capacity, this refers to the maximum throughput when the switch is fully in use.

Super Bronze

Re: what is a backplane

Backplane is the discreet circuitry that allows different computer components to communicate within the system's frame. A good example within a network device would be a chassis system. When you insert a card, it connects to the backplane. Also see: http://en.wikipedia.org/wiki/Backplane

Generically the term backplane also becomes the "glue" for internal system data communication. For instance, on a modern appliance switch, the "backplane" could be a combination of circuit traces and ICs that support communication between switch ports.

219
Views
0
Helpful
6
Replies