Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

What is my ip address on my switch?

Hi

I've got a switch with about 70 vlan's and 3 loopback interfaces on it, the switch also does routing. I want to telnet to a device on vlan 66, how do I know what ip the switch is going to use as the source ip address if I initiate the telnet from the switch?

Thanks

Dan

1 REPLY

Re: What is my ip address on my switch?

I believe it uses the closest interface to the destination (per the routing table). You can always source from an interface if you need to.

Router#telnet 1.1.1.1 /source-interface ?

Async Async interface

Auto-Template Auto-Template interface

BVI Bridge-Group Virtual Interface

CDMA-Ix CDMA Ix interface

CTunnel CTunnel interface

Dialer Dialer interface

FastEthernet FastEthernet IEEE 802.3

Lex Lex interface

Loopback Loopback interface

Multilink Multilink-group interface

Null Null interface

Tunnel Tunnel interface

Vif PGM Multicast Host interface

Virtual-Dot11Radio Virtual dot11 interface

Virtual-PPP Virtual PPP interface

Virtual-Template Virtual Template interface

Virtual-TokenRing Virtual TokenRing

Vlan Vlan IEEE 802.1q

vmi Virtual Multipoint Interface

Hope that helps.

239
Views
0
Helpful
1
Replies
CreatePlease login to create content