Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

What is the VLAN range on a 2960 switch.

Hi, I require to trunk VLANs over 1001 to a new cisco 2690 switch. My concern here is that these switches only support VLANs in the range of 1-1001. Could anyone please confirm if this is the case?

The part number of the switch is WS-C2960-24TT-L

Thanks in advance for any help.

3 REPLIES
Cisco Employee

Re: What is the VLAN range on a 2960 switch.

Hi Daniel,

This link should clear your doubts

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2960/12244se/scg1/swvlan.htm#wp1298058

Allowed vlans on trunk section

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2960/12244se/scg1/swvlan.htm#wp1150302

Please come back if you have any more doubts on the same.

HTH

Ankur

*Pls rate all helpfull post

Community Member

Re: What is the VLAN range on a 2960 switch.

Thanks for the reply, looks like as long as the switc is in vtp transparent mode vlans 1-4096 will be supported. Thanks.

Re: What is the VLAN range on a 2960 switch.

hi,

Yes you are right.If you want to use extended vlans in your 2960 you have to use VTP trnsperent mode.Because extended vlans are not stored in the vlab.dat file and can not be advertised in VTP advertisements.

AFAIK 2960 supports (in transperent mode) 1-4094 vlans but maximum no. vlans configured is 255. 0& 4095 are reserved for system use.

HTH,

regards,

shri :)

678
Views
0
Helpful
3
Replies
CreatePlease to create content