Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

what's the difference of XFP-10G-MM-SR,SFP-10G-SR and XENPAK-10GB-SR? Can they connect each other?

We are connecting a ASA 10G port with SFP-10G-SR to SCE 10G port with XFP-10G-MM-SR and C7609 10G port with XENPAK-10GB-SR, can they connect each other? or it is manadatory use the same SFP module for the connection?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: what's the difference of XFP-10G-MM-SR,SFP-10G-SR and XENPAK

The should be fine. According from the data sheet

SFP-10G-SR is 850nm MMF

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html

XFP-10G-MM-SR is 850nm MMF

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6574/product_data_sheet0900aecd802a61b9.html

XENPAK-10GB-SR is 850nm MMF

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5138/product_data_sheet09186a008007cd00_ps5455_Products_Data_Sheet.html

As long as the wave lenght and fiber type matched, they should be able to communicate.

HTH,

jerry

2 REPLIES
Cisco Employee

Re: what's the difference of XFP-10G-MM-SR,SFP-10G-SR and XENPAK

The should be fine. According from the data sheet

SFP-10G-SR is 850nm MMF

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html

XFP-10G-MM-SR is 850nm MMF

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6574/product_data_sheet0900aecd802a61b9.html

XENPAK-10GB-SR is 850nm MMF

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5138/product_data_sheet09186a008007cd00_ps5455_Products_Data_Sheet.html

As long as the wave lenght and fiber type matched, they should be able to communicate.

HTH,

jerry

New Member

Re: what's the difference of XFP-10G-MM-SR,SFP-10G-SR and XENPAK

thanks,jerry !!

4786
Views
0
Helpful
2
Replies
CreatePlease to create content