cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8362
Views
0
Helpful
6
Replies

which command to find router FAN series number

lcd_shouldit
Level 1
Level 1

Hi , I want to find router FAN series number, do you know which command can use ?

Sent from Cisco Technical Support iPhone App

2 Accepted Solutions

Accepted Solutions

S/N?  What are you trying to do?  If the fan is faulty, you raise an RMA based on the S/N of the appliance (and not the fan).

View solution in original post

"show environment all" will give you the status of the fans.

As Leo notes, they don't have individual serial numbers but on a 3825 router there are three fans. If you don't have Smartnet support you can purchase them individually or in a set of three from various resellers (amazon.com links provided here).

They're pretty standard "muffin" fans.

View solution in original post

6 Replies 6

Leo Laohoo
Hall of Fame
Hall of Fame

sh inventory raw

Thanks Leo, Looks like below that there is no serial number with this show command

NAME: "GigabitEthernet0/0", DESCR: "BCM1125 Internal MAC"

PID:                   , VID:    , SN:           

NAME: "GigabitEthernet0/1", DESCR: "BCM1125 Internal MAC"

PID:                   , VID:    , SN:           

NAME: "C3825NOVPN Chassis Slot 1", DESCR: "C3825NOVPN Chassis Slot"

PID:                   , VID:    , SN:           

NAME: "C3825NOVPN Chassis Slot 2", DESCR: "C3825NOVPN Chassis Slot"

PID:                   , VID:    , SN:           

NAME: "Container of powerSupply Containers", DESCR: "Container of powerSupply Containers"

PID:                   , VID:    , SN:           

NAME: "Container of Power Supply 1", DESCR: "Container of Power Supply 1"

PID:                   , VID:    , SN:           

NAME: "Power Supply  1", DESCR: "Power Supply  1"

PID:                   , VID:    , SN:           

NAME: "Container of Power Supply 2", DESCR: "Container of Power Supply 2"

PID:                   , VID:    , SN:           

NAME: "Container of RPS", DESCR: "Container of RPS"

PID:                   , VID:    , SN:           

S/N?  What are you trying to do?  If the fan is faulty, you raise an RMA based on the S/N of the appliance (and not the fan).

Got it.

Thanks a lot , Leo and Marvin.

Thanks for rating our posts. 

"show environment all" will give you the status of the fans.

As Leo notes, they don't have individual serial numbers but on a 3825 router there are three fans. If you don't have Smartnet support you can purchase them individually or in a set of three from various resellers (amazon.com links provided here).

They're pretty standard "muffin" fans.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: