Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Which WiSM Serial Number is correct?

I am trying to purchase a Smartnet contract for a WiSM card plugged into a 6509 and can't figure out which WiSM module serial number is correct. The P/N for the card is WS-SVC-WISM-1-K9. When I log into the 6509 and run 'sh idprom all' I get the following:


IDPROM for module #8

(FRU is 'WiSM WLAN Service Module')

OEM Stringf = 'Cisco Systems'

Product Number = 'WS-SVC-WISM-1-K9'

Serial Number = 'SADXXXXXXXX'

Manufacturing Assembly Number = '73-10361-06'

Manufacturing Assembly Revision = 'B0'

Hardware Revision = 2.3

Current supplied (+) or consumed (-) = -3.50A

But when I log into the WLC web page and go to "CONTROLLER" > "Inventory" the Serial Number listed is FAMXXXXXXXX.

Why aren't they matching up?


Thanks,

-mike

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Which WiSM Serial Number is correct?

Serial Number = 'SADXXXXXXXX'

This should be the s/n.

1 REPLY
Hall of Fame Super Gold

Re: Which WiSM Serial Number is correct?

Serial Number = 'SADXXXXXXXX'

This should be the s/n.

1094
Views
0
Helpful
1
Replies
CreatePlease to create content