Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

why my disk0:64m card can not suport in 6509 romm monitor

Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 08-Dec-06 11:13 by ccai
Image text-base: 0x4002100C, data-base: 0x42020000

ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)

Router uptime is 52 minutes
Time since Router switched to active is 51 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "sup-bootflash:c6k222-ps-mz.122-18.SXD7b.bin"

cisco WS-C6509 (R7000) processor (revision 3.0) with 458752K/65536K bytes of memory.
Processor board ID TBM05399327
R7000 CPU at 300Mhz, Implementation 0x27, Rev 2.1, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3  interface(s)
10 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102