Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

why netflow commands are not available in 4506-E?

Hi,

we have one 4506-E Chassis , Sup7L-E , LAN Base with cat4500e-universalk.SPA.03.03.00.SG.151-1.SG.bin image

why netflow commands are not available not available in this. someone said netflow will work only with IP base License , is that right?

Or how to enable it 

 

thanks

Sujish 

 

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Hi,For Nwtflow, you need IP

Hi,

For Nwtflow, you need IP Base or Enterprise Services License.

See table-1 in this link;

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_26675-01.pdf 

HTH

1 REPLY
VIP Super Bronze

Hi,For Nwtflow, you need IP

Hi,

For Nwtflow, you need IP Base or Enterprise Services License.

See table-1 in this link;

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_26675-01.pdf 

HTH

95
Views
0
Helpful
1
Replies