1720 router with 1enet wic,
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 10-May-02 19:06 by pwade
Image text-base: 0x800080E0, data-base: 0x806F2D18
ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
any help would be great!
It looks like you will need an IOS upgrade for this card to work.
The Cisco WIC-1ENET card requires Cisco IOS Release 12.2(2)XJ or later if the card is installed in any WIC slot other than slot 0 or if more than one card is installed.
The card can be used with Cisco IOS Release 12.2(4)T, but the card must be installed in slot 0 and only one Cisco WIC-1ENET card can be installed in the router.
Will this version work?
System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 65536 Kbytes of main memory
I'm not so sure that is for a 1720. You could give it a try but remember that routers have minimum flash and RAM requirements. It very well could work. Here are instructions on how to upgrade the IOS.