cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
411
Views
0
Helpful
2
Replies

Windows ip address conflicts

Daniel Davidson
Level 1
Level 1

We have started deploying cisco 3850 stacks to replace our ageing 4500 chassis.  However we have a handful of windows 7 systems that have started getting ip address conflict messages at startup.  The duplicate IP is shown as 0.0.0.0 and the mac is that of one of the new switches.

We have tried the recommendations at:

http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/8021x/116529-problemsolution-product-00.html

But these do not seems to work.  We have tried a range of delay times from the suggested value all the way to the maximum, and the windows registry trick does not seem to do anything.  Does anyone have any additional suggestions?

2 Replies 2

CrackedJack1
Level 1
Level 1

You might want to to try adding: nmsp attachment suppress
 

to your ports to disable IP tracking.

See this thread: https://supportforums.cisco.com/discussion/11960461/ip-device-tracking

I did that and it seemed to solve the problem although it's back again and gives me grief with VMs every now and then. I added a 4500-x to the mix and disabled using the other command in the thread above.

Leo Laohoo
Hall of Fame
Hall of Fame

You haven't provided any details about your DHCP server(s).

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: