I currently have a wireless guest access network using LWAP and a WISM controller. I have a remote office with AP's that are using option 43 to find the controller with the Guest SSID which is on the WISM in my data center.
This network is in a VRF which send the traffic to a firewall for internet access only. Pretty straight forward so far.
The issue I have is guest users having desktops and needing to print from this remote office. How can I have this wired subnet segmented off and join the existing VRF so that the wired and wireless subnets can communicate?
This office is connected via a Metro-E circuit which head ends into the 6500 where the VRF for wirless currently is.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.