Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Wireless AP standalone mode

Hi everyone, can anyone tell me if I can run the Cisco AIR-LAP1142n-a-k9 access point in standalone mode? I don't want it to look for a controller when it boots up.

Please advise.

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions

Wireless AP standalone mode

You'll have to update it. I believe the 1142 is upgradeable to standalone.

HTH, John *** Please rate all useful posts ***

Wireless AP standalone mode

The 1142 support autonomous mode.

This link shows you how to do it

https://supportforums.cisco.com/docs/DOC-14960

3 REPLIES

Wireless AP standalone mode

You'll have to update it. I believe the 1142 is upgradeable to standalone.

HTH, John *** Please rate all useful posts ***

Wireless AP standalone mode

The 1142 support autonomous mode.

This link shows you how to do it

https://supportforums.cisco.com/docs/DOC-14960

New Member

Wireless AP standalone mode

Perfect. Thanks guys.

1268
Views
0
Helpful
3
Replies
CreatePlease to create content