11-17-2017 05:47 AM - edited 03-08-2019 12:46 PM
Please any one can solved my problem
Thank you
i have both cisco router and switch, my wireless connected to a switch, the pc connected to the wireless can ping the router which is the switch is connected to the router, but the pc that is connected to switch can ping the wireless ..please help if there are any setting that i missed.
11-17-2017 06:04 AM
Hi @rollie
What do you mean by "but the pc that is connected to switch can ping the wireless " ?
You mean you can ping the Access Point connected to the Switch? What´s wrong with that?
-If I helped you somehow, please, rate it as useful.-
11-17-2017 06:28 AM
11-17-2017 06:38 AM
Still unclear what you mean by wireless. If you refer to the AP, make sure you dont have a ACL on it. AP should respond ping from the network considering default behavior.
-If I helped you somehow, please, rate it as useful.-
11-26-2017 05:59 PM
Thank for the replies problem solved already
11-17-2017 06:49 AM
Hello,
in addition to Flavio's post - what router and switch model do you use ? What are the IP addresses and default gateways of the PC and the 'wireless' ? Post the configurations of the devices you have in your setup...
11-17-2017 11:55 PM
11-17-2017 08:14 AM
Hello
How is this ap connecting - what mode it is using?
can you ping the Ap from the router
res
Paul
11-17-2017 10:46 PM
11-18-2017 01:25 AM - edited 11-18-2017 01:26 AM
Hello
Is your pc is connected wireless to the AP and are you receiving an ip address from the dhcp off the rtr?
On the AP, You'll need to have setup at least a SSID and associated that with a radio /physical interface and created a BVI mgt connectivity.
Can you post the config of the AP please.
res
Paul
res
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide