Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Wireshark Analysis

Hi,

Pls find the capture of Wireshark

Soruce:10.190.190.170

Destination:199.255.140.136

Websense IP: 10.190.147.28

We have webfiltering server(websense), So Any traffic which going to Internet it will be filtered via websense, We are suspecting some issue in Websense, but not able to get any relevant details from the capture

Can anybody help

Urgent help will be highly appreciated         

Br/Subhojit        

Everyone's tags (2)
6 REPLIES

Wireshark Analysis

Hi

You have not said what the actual issue is?

What are the symptoms?

Can you diagram your setup?

Thanks

New Member

Wireshark Analysis

Hi,

Our actual issue is for some of the Inteent Url page can't be displayed error is coming, But when we are using this url from Other location/Public Interent it is working

We are suspecting som issue in websense

Setup

User--Access switch--core switch--Juniper Internal Fw--DMZ Segment--ASA Firewall-- Interent Switch--Internet Router--ISP Cloud

Relevant Policy in Firewall & routing already present

Br/Subhojit

Cisco Employee

Wireshark Analysis

According to the Wireshark capture, something on the device is missing up the checksums. TCP checksums are incorrect.

The packets are received by the host (as can be seen in Wireshark), but they never reach the Destination (199.255.140.136) as the TCP checksums are incorrect.

Berta.

New Member

Wireshark Analysis

Hi,

Not able to get you, Where to check tcp checksum is having problme / on deivce or Firewall

Br/Subhojit

Cisco Employee

Wireshark Analysis

Tcp checksum could be on device or firewall, you need to check both of them. If the problem happens in any device of your network seems the checksum is falling on firewall.

Berta.

New Member

Wireshark Analysis

Hi,

In that case, Can you pls share how to check tcp checksum in asa fireall / command & iptions

br/Subhojit

311
Views
5
Helpful
6
Replies