WISM requirements for VSS

[tuan dang]

Hi all,

I have the following on my 6509:

Mod  Port Model              Serial #    Versions

---- ---- ------------------ ----------- -------------------------------------

  1   10  WS-SVC-WISM-1-K9   XXXXXXXXXXX Hw : 2.2

                                         Fw : 12.2(14r)S5

                                         Sw : 12.2(18)SXF16

                                         Sw1: 8.6(0.306)R3V39

          WS-SVC-WISM-1-K9-D XXXXXXXXXXXX Hw : 2.1

There are few documents that tell me different requirements for the WISM cards to configure VSS. Please give me some guidelines of what I need to do.

Thank you,

Tuan

[tuan dang]

In this document it says the minimum requirement is version 3.2 but the example they use are 2.2 and 2.1:

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note09186a0080a6c202.shtml