Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

WISM2, h-reap and 802.1x

Is there any solution when in different buildings where there will be AP and these buildings are similar vlan-id?

example:

Building 1

  • vlan ID 20= 172.16.20.0/24
  • vlan ID 21= 172.16.21.0/24

Building 2

  • vlan ID 20=192.168.20.0/24
  • vlan ID 21=192.168.21.0/24

In both buildings intend to put the same SSID with 802.1x authentication with ACS,

133
Views
0
Helpful
0
Replies