cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
434
Views
0
Helpful
1
Replies

WLAN Override and WiSM card issue

admin_2
Level 3
Level 3

Hi all,

We are having some issues with setting the WLAN override function in a situation where we have two 6504's with WiSM cards. When we test failover from one to the other we are finding that we are losing some of the SSID's. Both WiSM's are set up the same with the same SSID's available.

Obviously this is an issue as in a failure situation we are going to lose connectivity on some of our SSID's.

Has anyone come across the problem before?

Thanks,

Anthony

1 Reply 1

htarra
Level 4
Level 4

To get around this is to define all your SSIDs in all of your controllers so that the APs never lose their configs.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco