Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC 5508 Error

Hello,

Getting alot of the following errors on our 5508 form the same subnet: 10.20.0.1 255.255.248.0

I tried researching and not getting much, any help is appreciated.

broffu_SocketReceive: Jul 17 10:11:10.068: %DATAPLANE-3-DP_MSG: broffu_fp_dapi_cmd.c:2891 FP0.09:(7089389)[cmdAddIpv4:2921]failed to find ipv4 10.20.6.58

broffu_SocketReceive: Jul 17 10:11:08.395: %DATAPLANE-3-DP_MSG: broffu_fp_dapi_cmd.c:2891 FP0.00:(7089387)[cmdAddIpv4:2921]failed to find ipv4 10.20.5.5

Everyone's tags (2)
2 REPLIES
Hall of Fame Super Gold

WLC 5508 Error

What is your firmware?

New Member

WLC 5508 Error

7.2.103.0

this is the answer i got from TAC:

You are potentially hitting the bug CSCty48638 on your controller. There is no work around for this bug but it will be fixed in 7.3 code.

Symptom:

Controller message log is fixed filled with

%DATAPLANE-3-DP_MSG: broffu_fp_dapi_cmd.c:2891 FP1.03:(868163)[cmdAddIpv4:2921]failed to find ipv4 messages

Conditions:

It was caused due to apf was not cleaning up old/removed ip addresses (when client gets a new ip addr in roaming/change in ip scenario)

Workaround:

NA

942
Views
0
Helpful
2
Replies
CreatePlease to create content