02-15-2010 11:41 AM - edited 03-06-2019 09:42 AM
hi
Write Erase to a remote router will loss connection, anywayz to connect to remote router
I dont have support on remote location.
02-15-2010 12:08 PM
Hi Tom,
If you do a Write Erase, you will loose all your config on the box including your session. Then you have to send some one with console cable to reconfigure it.
HTH
Reza
02-15-2010 12:09 PM
Hi,
If you did wr erase on the remote router, that erased the startup configuration. It means there's no IP address on the router, therefore you cannot access it remotely.
You cannot PING or telnet/SSH into the router anymore correct?
If the router was rebooted, there's nothing to be done but copy a working configuration on the router again, or console in.
If the router has not been reloaded, you can copy the working running-config to the startup-config again.
Federico.
02-15-2010 12:24 PM
thankz guyz for the reply.
I got to get a support on site ; no wayout
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide