We have one of these with 4 Fourx adapters in it and want to use 1gb GBICs but whenever we enable the interface it err-disables. We've entered the hw command to put the 40G in 10G mode but still no go. Any ideas? I think we need to return the 40G and get the WS-X6848-SFP instead. We bought the 40G for future upgrades but I need to get the 6509 installed to replace our Core stack. The 6509E has 2 Sup2T engines running 15.0.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...