Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

WS-C2960-24TC-S and GLC-GE-100FX= module-How to configure

Hi, I am trying to install WS-C2960-24TC-S and GLC-GE-100FX= module,but i am not able to configure it, pls let me know this switch is plug n play or we need to configure it, if we need to configure it pls let me know how to configure.It would be nice if i get a link of it.

Thanks & Regards

5 REPLIES
Purple

Re: WS-C2960-24TC-S and GLC-GE-100FX= module-How to configure

Its plug and play if you don't want to manage the switch or use the hundreds of features available on the switch otherwise yes you have to configure it . Here is a guide.

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_25_see/configuration/guide/swtrafc.html

New Member

Re: WS-C2960-24TC-S and GLC-GE-100FX= module-How to configure

dear sir

i am having switch catalyst 2960 series Sl and i have attached a fibre optic module GLC-GE-100FX my question is. Is this a plug and play as do not want to use any other feature of the switch except to give fibre optic conectivity through this switch.the modules on both the ends should be same or different modules can work and how do i come to know that it is working as in 2950 a red color lazer light comes when it is powered on but in this no light comes when powered on.

please help

Anush

New Member

Re: WS-C2960-24TC-S and GLC-GE-100FX= module-How to configure

dear sir

i am having switch catalyst 2960 series Sl and i have attached a fibre optic module GLC-GE-100FX my question is. Is this a plug and play as do not want to use any other feature of the switch except to give fibre optic conectivity through this switch.the modules on both the ends should be same or different modules can work and how do i come to know that it is working as in 2950 a red color lazer light comes when it is powered on but in this no light comes when powered on.

please help

Anush

Hall of Fame Super Silver

Re: WS-C2960-24TC-S and GLC-GE-100FX= module-How to configure

Hello Anush,

this kind of SFP makes the link a 100 Mbps fiber based link it is a special SFP.

As indicated by Leo you need at least release 12.2(37)EY to have it working

see table 8 of the link provided by Leo

Hope to help

Giuseppe

Hall of Fame Super Gold

Re: WS-C2960-24TC-S and GLC-GE-100FX= module-How to configure

What is your IOS version. You need at least 12.2(37)EY.

Go to the link below and look under Table 8 for more information about your switch and SFP compatibility based on IOS requirements:

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL632702.html

Hope this helps.

942
Views
0
Helpful
5
Replies
CreatePlease to create content