Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WS-C2960-24TT-L Ports Issue

Kindly confirm the problem, of the following cisco switch. Is it a hardware failure?

WS-C2960-24TT-L

The first 8 ports of the switch are not working and in amber state and rest of the ports are working fine. Error log is attached.

Thanks,

Majid

1 REPLY

Re: WS-C2960-24TT-L Ports Issue

Kindly confirm the problem, of the following cisco switch. Is it a hardware failure?

WS-C2960-24TT-L

The first 8 ports of the switch are not working and in amber state and rest of the ports are working fine. Error log is attached.

Thanks,

Majid

           
        Attachments:                

Hi Majid,

Genrally The asic chips control 4 ports each in switch,can you share the output of show post if it has the following output

POST FAILED: FastEthernet0/21 failed front-end loopback test
POST FAILED: FastEthernet0/22 failed front-end loopback test
POST FAILED: FastEthernet0/23 failed front-end loopback test
POST FAILED: FastEthernet0/24 failed front-end loopback test

so just open a TAC case and get it replaced.

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

486
Views
0
Helpful
1
Replies
CreatePlease to create content