2960S is formed a port-channel with 2960. When 2960S physical Interfaces are configured with 100 full, outdiscards packets issue are found at 2960S egree queue. I checked the traffic flow via the port-channel under 100 MB, and it only found at 2960S, 2960 does not have this issue. I have updated both switch to 12.2(58). Does anyone know what is happening?
PS: 2960 do not support 1G full.
I had done any test by using 2 2960S to form a port-channel. If I configure both switch to 100 full, outdiscards packet issue found. When I changed both physcial Interface to 1G full, problem solved.
Does it mean 2960S physical interface only allow 1G traffic even I set it to 100?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...