Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-C2960S-48TS-S with Network Assistant

Hello all,

Do you know if the switch WS-C2960-48TS-S will be supported soon by the Network Assistant software ?

Tank you for your response.

Best regards

10 REPLIES

Re: WS-C2960S-48TS-S with Network Assistant

Hello all,

Do you know if the switch WS-C2960-48TS-S will be supported soon by the Network Assistant software ?

Tank you for your response.

Best regards

Hi,

Both Cisco Catalyst 2960 LAN Base and LAN Lite Switches support the following capabilities:

• Network management tool support by CiscoWorks, Cisco Network Assistant, and Catalyst Device Manager.

Hope to Help !!

Ganesh.H

New Member

Re: WS-C2960S-48TS-S with Network Assistant

Hi

i just installed 2x cisco C2960S-24TS-L  (LAN Base Switch) and configured as a stack

when i detect this with CNA5.5 it tells me that it is an unsupported device.

i find this very odd as the documentation and all the download links point to CNA 5.5

regards

New Member

Re: WS-C2960S-48TS-S with Network Assistant

Same for WS-C2960-48TS-S, Network Assistant said that the equipment is not supported.

Therefore, I wonder if the care is provided in the roadmap

New Member

Re: WS-C2960S-48TS-S with Network Assistant

I'm having the same problem.  A fix would be nice.

Bronze

Re: WS-C2960S-48TS-S with Network Assistant

Hi

   CNA support for 2960S is expected to be in version 5.6, tentatively scheduled for later this year. Hope this helps.

New Member

Re: WS-C2960S-48TS-S with Network Assistant

Cisco has introduced several new switches and didn't upgrade CNA to support them. I had to open a ticket with Cisco to find this out. Disappointing that Cisco can't even create a tech note to explain this. Apparently 5.6 which is beta will support these new switches. How about Cisco introducing the new CNA when the new switches come out?

New Member

Re: WS-C2960S-48TS-S with Network Assistant

Hi All,

Also I have had the same issue, and raised a ticket with Cisco. It took the tech a few days to come with the final answer!

The C2960S devices will be supported in CNA5.6, but the release is postponed untill 2011!!!

Also, since a few weeks, my switches (mainly the C3750's) started to have memory errors causing me not able to logon, not even by console cable.

Seems the http-server setting in combination with my IOS is causing the problems, and the only way to solve is to disable the http-server and a power cycle, resulting in the fact I'm unable to use CNA for part of my network......

Anyone else have the same issue?

Regards,

Quirijn

New Member

Re: WS-C2960S-48TS-S with Network Assistant

Hi,

No I have not had problem with my 3750's

However the CNA 5.6(3) still cannot see my brand new WS-C2960CG-8TC-L. Wenn will that be solved ? (Can someone from Cisco answer ? )

Regards,

David

New Member

WS-C2960S-48TS-S with Network Assistant

I also have this problem. It is very poor that CNA is not compatible with this switch.

Daniel

WS-C2960S-48TS-S with Network Assistant

I had the problem in a similar machine, and since new version of CNA (5.8) is working OK.

3111
Views
0
Helpful
10
Replies