i have a Ws-C3550-24-Emi switch and i need to upgrade its flash memory to 32Mb. I couldn't find any documents in cisco website about the memory upgrade guideline. Does anyone know if i can upgrade this switch to 32Mb? If so, what's the max of memory i can upgrade? and the part number for this type of memory?
Question was regarding 3550 instead of 3500XL (if there is such a model anyway). 3550 is a fixed config switch, already end of life, I believe the flash chip is soldered to the motherboard, so it would be very difficult (difficult is a polite word for impossible) to replace it.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...