01-19-2016 02:39 PM - edited 03-08-2019 03:27 AM
I want to test all 48 ports of 3750 switches same time,is there any command to test these port without using Cat5 cable in single port?
Solved! Go to Solution.
01-19-2016 10:01 PM
To test the physical ports you need something plugged in, incase there is damage to the the pins on the interface.
01-19-2016 10:01 PM
To test the physical ports you need something plugged in, incase there is damage to the the pins on the interface.
03-31-2016 01:18 PM
Thanks for that, that is the only solution which
03-31-2016 05:08 PM
The startup tests and software tests check the switch up to the "final logical interface", but have no way to verify the final hardware drivers and physical interface. It's cable time !
01-19-2016 10:21 PM
Well the switch does a test of sorts on power up (the Power On Self Test). Turn it off and on and watch the log.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide