Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WS-C3750G-48TS power faulty

We have a stacked 3750 that has RPS supplying but the main power is fine. Is there a reason why it's not failing back over? Is there a way to force this?

thx

nj02ga03oas44#show env all

FAN is OK

TEMPERATURE is OK

Temperature Value: 36 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 56 Degree Celsius

Red Threshold : 66 Degree Celsius

POWER is FAULTY

RPS is SUPPLYING

nj02ga03oas44#

Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Fri 28-Jul-06 12:55 by yenanh

Image text-base: 0x00003000, data-base: 0x010272D8

ROM: Bootstrap program is C3750 boot loader

BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)

1 ACCEPTED SOLUTION

Accepted Solutions

Re: WS-C3750G-48TS power faulty

Hi,

Switch will not auto sense that the power came back on. Switch has to be reload to reconnect to main power.

Regards,

~JG

Please rate helpful posts

1 REPLY

Re: WS-C3750G-48TS power faulty

Hi,

Switch will not auto sense that the power came back on. Switch has to be reload to reconnect to main power.

Regards,

~JG

Please rate helpful posts

922
Views
0
Helpful
1
Replies