Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

WS-C3750X-24T-L with EIGRP

Hi,

The model WS-C3750X-24T-L is only Lan Base. We need this switch to use EIGRP Protocol. Does it exist a License for supportting IP Base o IP Services Feature Set?

Expect for your comments.

Regards,

Mitchell

Everyone's tags (1)
4 REPLIES
VIP Super Bronze

WS-C3750X-24T-L with EIGRP

Hi,

You can upgrade it to IP Base or IP Services.  IP Base gives you only EIGRP Stub.  If you want full EIGRP, OSPS, BGP, etc... support you need IP services.

http://www.cisco.com/en/US/products/ps10745/prod_models_comparison.html

HTH

New Member

WS-C3750X-24T-L with EIGRP

Hi,

I am trying the IP Services in the WS-C3750X-24T-L with a Demo License.

I have the following message:

Index 1 Feature: ipservices

        Period left: 8  weeks 4  days

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

        License Priority: None

        License Count: Non-Counted

Index 2 Feature: ipbase

        Period left: 0  minute  0  second

Index 3 Feature: lanbase

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Priority: Medium

        License Count: Non-Counted

Any of you knows how to change IP Service License from "Not in Use" to "In Use"?

Expect for your comments.

Regards,

Mitchell

Green

WS-C3750X-24T-L with EIGRP

Hi

http://www.cisco.com/en/US/docs/ios/csa/command/reference/csa_book.html

Try going in to config t

switch(config)# license accept end user agreement

See if that changes the status to in use.

Regards

Alex

Regards, Alex. Please rate useful posts.
VIP Super Bronze

Re: WS-C3750X-24T-L with EIGRP

Mitchell,

Try this command and then reboot:

license boot level ipservices

Alex,

According to the link you provided, the command license accept end user agreement is only available in IOS 15 and later for ISR G2 routers.

HTH

795
Views
3
Helpful
4
Replies
CreatePlease to create content