We have WS-C4006 SupIII Module Switch IOS 12.18a, we have just received a new batch of PCs and notice we don't received an IP address on boot up from our DHCP Server. The DHCP Server is on the same VLAN as the PCs. Also we have a policy server which can't push out the setting to the PCs. Can you please advise if this issue is related to port fast. Thanks for your help in advance.
You should enable portfast on all PC ports. Portfast will allow the port to immediately go to the forwarding spanning tree state. If your problem is caused by portfast being disabled you will be able to use ipconfig /renew from the PC command line, and get an address.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...