Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

WS-C4503 with WS-x4013=TS Sup

When i power the unit up the Supervisor engine status light does not come on.

3 REPLIES
Purple

Re: WS-C4503 with WS-x4013=TS Sup

Pull out the supervisor and then reseat it. I have seen that before , sometimes that will fix it .

New Member

Re: WS-C4503 with WS-x4013=TS Sup

Thanks but i tried that several times

Hall of Fame Super Gold

Re: WS-C4503 with WS-x4013=TS Sup

Have you tried "power enable module "?

272
Views
0
Helpful
3
Replies
CreatePlease to create content