11-08-2010 04:22 PM - edited 03-06-2019 01:57 PM
i'm going to purchase a ws-x6148a-45af , my question is if this blade is compatible with Ws-C6509 chassis with SUP2-2GE with 12.2(18)SXF1 IOS
Thank you
Solved! Go to Solution.
11-08-2010 04:28 PM
cmiranda23 wrote:
i'm going to purchase a ws-x6148a-45af , my question is if this blade is compatible with Ws-C6509 chassis with SUP2-2GE with 12.2(18)SXF1 IOS
Thank you
From the 12.2SXF release notes -
WS-X6148A-RJ-45 | 1.00 A@42 V | 48-port 10/100TX RJ-45 •5.3-MB per-port packet buffers •QoS port architecture (Rx/Tx): 1p1q4t/1p3q8t •WS-X6148A-RJ-45 supports WS-F6K-GE48-AF or WS-F6K-48-AF •WS-X6148A-45AF has WS-F6K-GE48-AF or WS-F6K-48-AF •Number of ports: 48 | |
WS-X6148A-45AF | 2.57 A@42 V | ||
With Supervisor Engine 720 | 12.2(18)SXF | ||
With Supervisor Engine 32 | 12.2(18)SXF | ||
With Supervisor Engine 2 | 12.2(18)SXF2 |
so you need 12.2(18)SXF2 for the sup2.
Jon
11-08-2010 04:28 PM
cmiranda23 wrote:
i'm going to purchase a ws-x6148a-45af , my question is if this blade is compatible with Ws-C6509 chassis with SUP2-2GE with 12.2(18)SXF1 IOS
Thank you
From the 12.2SXF release notes -
WS-X6148A-RJ-45 | 1.00 A@42 V | 48-port 10/100TX RJ-45 •5.3-MB per-port packet buffers •QoS port architecture (Rx/Tx): 1p1q4t/1p3q8t •WS-X6148A-RJ-45 supports WS-F6K-GE48-AF or WS-F6K-48-AF •WS-X6148A-45AF has WS-F6K-GE48-AF or WS-F6K-48-AF •Number of ports: 48 | |
WS-X6148A-45AF | 2.57 A@42 V | ||
With Supervisor Engine 720 | 12.2(18)SXF | ||
With Supervisor Engine 32 | 12.2(18)SXF | ||
With Supervisor Engine 2 | 12.2(18)SXF2 |
so you need 12.2(18)SXF2 for the sup2.
Jon
11-08-2010 04:33 PM
Thank you, i've already read the 12.2SXF Release, will read thoroughly next time
Again Thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: