07-09-2014 09:33 PM - edited 03-07-2019 08:00 PM
WS-C6509-E not supporting 256 MB disk. upon inserting message pops up but "no such device" error comes when runing "sh disk0/1:"
SUP = 720 and 720-3B
00:08:03: %FILESYS-SP-5-DEV: PCMCIA flash card inserted into disk1
Router#
Router#
Router#
Router#sh disk1
%Error show disk1: (No such device)
Router#
Its working fine with 128 MB Disk
07-09-2014 10:20 PM
There's a possibility that your PCMCIA card you're using either is dead, non-Cisco or not-standard.
07-10-2014 09:40 AM
thanks :) but my 128MB disk is working fine in both SUP and both slots..
07-10-2014 03:41 PM
but my 128MB disk is working fine in both SUP and both slots..
And this only proves that the PCMCIA slot is not at fault. So this means that:
I do not believe the 256 mb PCMCIA card is not working because it's not formated. Even if it's not formated properly the error message would've been different.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: