i am having a connectivity issue with ws-g5484 gbic converter...i am using 4507 with redundant sup engine and one 4506...in both of the switches these 5484 converters are showing not connected....customer bought 25 of them but 15 of them are not working for them....5484 converter is from cisco itself and i am trying to connect to gbic itself....
these gbics when i tried on a 6509 it is working fine....please help me to soleve this issue...
sepcs of the gbic converter that we are using is
part number: 30-0759-01
what surprises me is that some of the same gbics are working fine with this 4507 and 4506....so i am confused to whether there is something else to be done for this to work....awaiting for a reply...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...