Re: WS-SUP32-GE-3B can I use the 8 ports + 8 port standby simult
From the SUP32 FAQ
Q. For the 8-port Sup32 model, how many uplink ports can be simultaneously active?
A. For a single Sup 32, all 8 uplink ports can be active simultaneously. For redundant configurations, all 16 uplink ports can be active, but not all ports can operate at line rate simultaneously because of the bus speed at 15 Mpps.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...