Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-SUP720-3B and 10G compatibility

Im trying to find information on using sup720-3b and use 10g line cards.  Can anyone show me a link of a compatibility matrix for 3B versus 3C?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: WS-SUP720-3B and 10G compatibility

erisanchez@firstam.com

Im trying to find information on using sup720-3b and use 10g line cards.  Can anyone show me a link of a compatibility matrix for 3B versus 3C?

Not entirely sure what you are looking for ? Have a look at Table 2 in this doc and see if it answers your question(s) -

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/qa_cisco_catalyst_6500_series_16port_10gigabit_ethernet_module.html

Jon

8 REPLIES
Hall of Fame Super Blue

Re: WS-SUP720-3B and 10G compatibility

erisanchez@firstam.com

Im trying to find information on using sup720-3b and use 10g line cards.  Can anyone show me a link of a compatibility matrix for 3B versus 3C?

Not entirely sure what you are looking for ? Have a look at Table 2 in this doc and see if it answers your question(s) -

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/qa_cisco_catalyst_6500_series_16port_10gigabit_ethernet_module.html

Jon

New Member

Re: WS-SUP720-3B and 10G compatibility

Overall, I am trying to find any information if I need to upgrade my sups to 720-3Cs or can I cost save and upgrade the IOS on my 720-3Bs.  Would a 6716-10G line card be compatibable with a 720-3B?

Hall of Fame Super Blue

Re: WS-SUP720-3B and 10G compatibility

erisanchez@firstam.com

Overall, I am trying to find any information if I need to upgrade my sups to 720-3Cs or can I cost save and upgrade the IOS on my 720-3Bs.  Would a 6716-10G line card be compatibable with a 720-3B?

You will be fine with a Sup720-3B. From the same doc i sent a link to -

Q. Which supervisor engine supports the 16-port 10 Gigabit Ethernet module?

A. The 16-port 10 Gigabit Ethernet module works with any Virtual Switching Supervisor Engine 720-10G or Supervisor Engine 720, including VS-S720-10G-3C, VS-S720-10G-3CXL, WS-Sup720, WS-Sup720-3B, and WS-Sup720-3BXL.

Jon

New Member

Re: WS-SUP720-3B and 10G compatibility

Jon:

tyvm.  I appreciate your assistance with this.

New Member

sh version

sh version

Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-IPSERVICESK9-M), Version 15.2(4)S3a, RELEASE SOFTWARE (fc1)

Supervisor Engine 720 (Active)         WS-SUP720-3B       SAL1407B6J0

Does it support for below line cards

WS-X6708-10G-3C=

C6K 8 port 10 Gigabit Ethernet module with DFC3C (req. X2)

WS-X6908-10G-2T=

C6K 8 port 10 Gigabit Ethernet module with DFC4 (Trustsec) S

New Member

Hi. Did you ever get the WS

Hi. Did you ever get the WS-X6708-10G-3C= working with a SUP720-3B.

I have a short term fix requirement for 10G into 6500 before refresh to 6708 Sup6T.

Super Bronze

I believe we have 6708 line

I believe we have 6708 line cards working with both sup720-3Bs and VS-S720s.  The 6708 will not work with a sup2T (and probably not a sup6T either.)

To work with a sup2T, and you need a CFC or DFC4 line card, and the 6708's DFC3C cannot be upgraded or removed.

New Member

Thanks Joseph,

Thanks Joseph,

Small typo above, I meant refresh to 6807 chassis with Sup6T so the 6708 cards would be traded in for 6800 16port 10G.

8655
Views
20
Helpful
8
Replies
CreatePlease login to create content