Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WS-X6148-GE-TX Private Vlan vs Trunk

Hi,

I've configured private vlan on a few port on the 6500 with the WS-X6148-GE-TX module. Everything is working fine until i configure trunk port to some of the available interface. The interface is not up but on the other end, it's up.

This is the configuration:-

interface GigabitEthernet2/6

switchport

switchport trunk allowed vlan 20,50

switchport mode trunk

no ip address

no logging event link-status

spanning-tree guard root

!

interface GigabitEthernet2/7

switchport

switchport trunk allowed vlan 20,50

switchport mode trunk

no ip address

no logging event link-status

spanning-tree guard root

!

interface GigabitEthernet2/8

switchport

switchport private-vlan host-association 20 21

switchport mode private-vlan host

no ip address

no logging event link-status

!

interface GigabitEthernet2/9

switchport

switchport private-vlan host-association 20 21

switchport mode private-vlan host

no ip address

no logging event link-status

Is it because of the ASIC port limitation issue?

151
Views
0
Helpful
0
Replies