Do you mean you purchased a 6516 module just for uplink or server connectivity ? Both 67xx and 6516 modules are supported with SUP 720 (which is what u use with VSS).. and hence this module should work with SUP 720. the only limitation is 67xx modules work only with sup 720.. if u have sup 2 (which you would obviously not have with VSS), 67xx doesnt work.. The following URL shows the compatibiltiy matrix:
This URL confirms this !.. probably another way to market 67xx modules I really donno what the edge switch module has to do with VSS functionality.. probably they might bring in more modules in future for VSS support...
Thanks for the input.. VSSas a functionality is more towards core/distribution layer in any network.. and when bundling chassis together, isnt it more important for us to have high end modules connecting these switches, rather than restricting GE modules which would connect to end PC's/servers or trunks ? This rather limits multiple end user options which we get with a normal SUP 720 supervisor, which supports far more modules.. Is there any roadmap to add more modules to support the VSS environment ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...